FiiO X Jade Audio JA11
Headphone Output: 3.5mm (Single-Ended) USB Connection: USB Type-C (non-detachable cable) Output Power: L+R ≥ 30mW + 30mW (32Ω, THD+N < 1%, USB IN) Microphone Pass-Through: Supported Note: Some phones may not support microphone input due to operating system limitations.
Distortion: <0.004% (0dB, 32Ω); <0.003% (0dB, 300Ω) Noise Floor: 1.7uV (A-weighted) Signal-To-Noise Ratio: ≥115dB (32Ω, A-weighted) Crosstalk: 265dB (1kHz, 32Ω) Output Impedance: <0.5Ω Frequency Response: 20Hz~20kHz, +0.1dB attenuation; 20Hz~50kHz, +0.2dB Supported Sampling Rates: PCM: 384kHz / 32bit; DSD: DOP 128
Weight: Approx. 5g Colour: Black / Silver
Box Contents:
-
1x FiiO X Jade Audio JA11
-
1x Instruction Manual
-
1x Warranty Card
FiiO UTWS5 2025
Bluetooth Chip: QCC5141 DAC Chip: AK4332 * 2 Bluetooth Encoding: SBC, AAC, aptX, aptX Adaptive, LHDC(3.0), LDAC (only supports Snapdragon listening devices) Bluetooth Version: 5.2 Battery Life: About 8 hours (headphone), 2 charges (charging box) Standby Time: 200h Output Power: 55mW (per channel) Output Impedance: <0.4Ω (32Ω) Signal-to-Noise Ratio: 110dB (A-weighted) THD+N: <0.1% (1 kHz/32Ω/A weighted) Charging Interface: Charging box Type-C, ear hook wireless charging Headphone Interface: Expansion type MMCX, 0.78mm double pin Single Ear Weight: About 8g (excluding cable) Size: About 93 x 70 x 36mm (charging box)
FiiO SNOWSKY RETRO NANO
Bluetooth Chip: QCC5125 (CPU + DSP dual-core architecture) DAC: CS43131*2 Bluetooth Version: 5.1 Bluetooth Codecs: AAC, SBC, aptX, aptX LL, aptX Adaptive, aptX HD, LDAC USB DAC: Driver-free up to PCM 96k Display: 0.96 inch, 80x160 color IPS Headphone Outputs: Single-ended 3.5mm + Balanced 4.4mm In-line Controls: Supports microphone, volume adjustment, and play/pause controls in CTIA protocol Color: White / Blue Dimensions: 55.1 x 37.5 x 13.7mm Weight: 28.3g (including battery) Power Supply: DC 5V-1A Battery: 3.7V rechargeable lithium battery (compatible with similar 10440 batteries), not compatible with AAA (1.5V) batteries Charging Time: ≤2 hours Battery Life: About 7.5 hours (single battery)
Output Power 1: L+R ≥100mW + 100mW (32Ω single-ended, THD+N < 1%) Output Power 2: L+R ≥220mW + 220mW (32Ω balanced, THD+N < 1%) Frequency Response: 20Hz ~ 40kHz (-3dB) SNR: ≥128dB (A-weighted) Noise Floor: PO <1μV (A-weighted); BAL < 1μV (A-weighted) Output Impedance: <0.3Ω (32Ω load) THD+N: <0.0018% (1kHz/-4dB @32Ω)
Inside the Box:
-
1x RETRO NANO
-
1x Type-C to Type-C data cable
-
1x Battery
-
1x Battery storage case
-
1x Lanyard
-
1x Quick start guide
-
1x Warranty card
-
2x Sticker
-
1x Warning card
FiiO SNOWSKY Echo Mini
Weight: 55g Dimensions: 80 x 54.5 x 14.5 mm Display: 1.99-inch color LCD DAC: Dual CS43131 Storage:
-
Internal: 8GB
-
External: Supports microSD card up to 256GB
Bluetooth Codec: SBC Playback Formats: DSD, WAV, FLAC, APE, MP3, M4A, OGG
Sampling Rates:
-
DSD: 64/128/256
-
WAV: 24-bit / 192kHz
-
FLAC: 24-bit / 192kHz
-
APE: 24-bit / 96kHz
Outputs: 3.5mm single-ended / 4.4mm balanced
Output Power:
-
Output 1 (32Ω single-ended): L+R ≥ 100mW + 100mW (THD+N < 1%)
-
Output 2 (32Ω balanced): L+R ≥ 250mW + 250mW (THD+N < 1%)
SNR: ≥ 131dB (32Ω A-weighted) THD+N: 0.0004% Noise Floor: 0.8 µV
Inside the Box:
-
1x ECHO MINI
-
1x USB cable
-
1x Quick start guide
-
1x Warranty card
FiiO K11
Colors: Black Main Control Chip: GD32F303RET6 (Single-chip Microcomputer) DAC: CS43198 Supported Audio Formats: 384kHz/32bit PCM, DSD256 USB Connector: Type-C Display Type: Custom LCD Dimensions: 147 x 133 x 32.3mm (including feet) Weight: Approximately 407g Power Supply: DC12V 2A External Adapter
Power Output: SE Power Output 1: L+R ≥ 520mW + 520mW (32Ω, THD+N < 1%) (Single-ended / High Gain) SE Power Output 2: L+R ≥ 60mW + 60mW (300Ω, THD+N < 1%) (Single-ended / High Gain) BAL Power Output 1: L+R ≥ 1400mW + 1400mW (32Ω, THD+N < 1%) (Balanced / High Gain) BAL Power Output 2: L+R ≥ 250mW + 250mW (300Ω, THD+N < 1%) (Balanced / High Gain)
Frequency Response: 20Hz ~ 50kHz (Attenuation < 0.2dB) SNR (Signal-to-Noise Ratio): ≥ 123dB (A-weighted) Noise Floor: PO < 2.8uV (A-weighted); BAL < 4.9uV (A-weighted) Output Impedance: PO < 1.2Ω (32Ω load); BAL < 2.4Ω (32Ω load) THD+N: LO < 0.00035% (1kHz / 10kΩ)
Inside the Box:
-
1x K11
-
1x Power adapter (including AC cable)
-
1x USB A to C cable
-
1x 6.35mm adapter
-
1x Quick start guide
-
1x Warranty card
FiiO FT1
Headphone Type: Closed-back dynamic headphones Frequency Response: 10Hz-40kHz Driver: 60mm dynamic Impedance: 32Ω Sensitivity: 98dB/mW@1kHz / 113dB/Vrms@1kHz Cable Material: Silver-plated oxygen-free copper Earpad Pressure: 4.5N ± 0.3N Cable Length: About 1.5m Weight: 340g (excluding cable) Headphone Connector: Dual 3.5mm TRS Audio Cable Plug: 3.5mm/4.4mm Ear Cup Material: Black walnut / Beech
Inside the Box:
-
1x Headphones
-
1x Storage Bag
-
1x Packaging Box
-
1x 3.5mm Headphone Cable
-
1x 4.4mm Balanced Cable
-
1x 3.5mm to 6.35mm Adapter
-
1x Quick Start Guide
FiiO KA11
DAC: CS43131
Op-Amp: SGM8262
Maximum Supported Formats: 384kHz/32bit, DSD256
Input: Type-C or Lightning
Output: 3.5mm Headphone Connection
Dimensions: Approx. 44.5 × 9.7 × 10.5mm
Cable Length: Approx. 65.5mm
Weight: Approx. 8.5g
Output Power 1: L+R ≥ 245mW+245mW (16Ω, THD+N < 1%)
Output Power 2: L+R ≥ 200mW+200mW (32Ω, THD+N < 1%)
Signal-to-Noise Ratio: ≥ 125dB (32Ω, A-weighted)
Noise Floor: PO < 1.7μV (32Ω, A-weighted)
Output Impedance: < 0.7Ω (32Ω)
THD+N: < 0.0006% (32Ω) / < 0.00038% (300Ω)
Inside the Box:
-
1 × FiiO KA11
-
User Manual